14834 Send is not yet complete. Unexpected disconnect.
14835 >>> Data Available timer has expired
14836 >>> Clear To Send timer has expired
14837 >>> Connection Established timer has expired
14838 >>> Disconnect Complete timer has expired
14839 Unexpected timer message
14840 InitializeChannel: G3 Fax
14841 Unable to initialize channel. %s
14842 Unable to configure channel. %s.
14843 SendAJob: dialing for G3 fax connection
14844 Error while dialing: %s
14845 Error - event already in progress
14846 OnClearToSend %d
14847 All data has been sent. Message ignored.
14848 Send failed
14849 Not in send mode. Message ignored.
14850 OnDataReceived %d
14851 Job is complete or cancelled. Message ignored.
14852 Receive failed. Aborting call.
14853 OnReceiveQFull *********
14854 OnConnectionEstablished
14855 Sending first blocks of data
14856 Ready to receive data
14857 OnDisconnecting
14858 OnNoConnection
14859 Unexpected disconnect BUT send is complete!
14860 Unexpected disconnect.
14861 Unexpected job status.
14862 No more retries. Mark job as failed.
14863 Receive job initiated but connection never established.
14864 Receive failed. Error code %d.
14865 OnJobAborted
14866 InitializeChannel: X75 (SpeedFax)
14867 SendAJob: dialing for BFT (X75) connection
14868 Waiting for SpeedFax handshake response. Message ignored.
14869 SpeedFax handshake successfully completed
14870 SpeedFax handshake failed. Aborting call.
14871 Looking for response to SpeedFax handshake
14872 Correct SpeedFax response detected
14873 Wrong response. Closing connection.
14874 Unexpected data received. Message ignored.
14875 OnConnectRequest
14876 Call rejected: Speed fax disabled.
14877 Sending initial handshake packet
14878 Couldn't allocate timer for response timeout
14879 Couldn't send handshake packet.
14880 Ready to receive data. Waiting for handshake.
14881 Retry this job as a fax call
14882 Send failed. Error code %d.
14883 No response to SpeedFax handshake within timeout period
14884 Call ignored: Global calls (no MSN) are disabled
14885 Call accepted. (Global call - no MSN)
14886 Error: CAPI does not support G3 Fax protocol
14887 Error: CAPI does not support X75 protocol
14888 ISDN
14889 ISDN/CAPI
14890 ISDN/CAPI (Common ISDN API)
14891 Unknown
14892 Caller
14893 ISDN Error:
14894 Invalid channel ID
14895 The remote is busy
14896 The remote has rejected the call
14897 No answer
14898 No line to the exchange (check cable)
14899 Requested service is unavailable or has not been applied for
14900 Connection is barred against outgoing calls
14901 Connection cannot be made because of a negative Closed User Group
14902 Wrong destination
14903 Remote number had changed
14904 Remote is barred against incoming calls or has not applied for the requested service
14905 Remote is out of order
14906 Group 3 fax error
14907 CAPI unlisted error
14908 CAPI is unstable
14909 CAPI not found
14910 ISDN channel not initialized
14911 Channel not active
14912 Current channel state not valid for requested function
14913 Connection not present
14914 Send queue is full. Data cannot be sent
14915 No more channels are available
14916 Transmission refused, block passed is too large
14917 Queue hook has already been installed
14918 Not enough memory available
14919 The number to call is invalid
14920 Invalid function parameter
14921 There is no incoming call
14922 Requested timer resource is not available
14923 No error code is available
14924 Your ISDN card/CAPI drivers are not configured properly to work with @TW_MARQUEE. Please exit @TW_MARQUEE and re-configure your ISDN card before trying to use @TW_MARQUEE again.
14925 @TW_MARQUEE
14926 @TW_MARQUEE is unable to send your fax because your packet size setting is too large. Reduce the packet size (on the Setup menu, click Modem, click your ISDN card and then click Properties) and try re-sending your fax.
14927 ISDN Device (CAPI 2.0)
14928 The CAPI installed on your system does not support the G3 Fax protocol. You will not be able to fax with this version of CAPI. Contact your ISDN card manufacturer for a CAPI update with fax support.
14929 Unable to initialize pager support. You will not be able to issue pages over ISDN.
14930 Fax protocol is supported:
14931 This device can send and receive faxes.
14932 Fax protocol is NOT supported:
14933 You will not be able to send or receive faxes with this device.
14934 DTMF detection is supported:
14935 DTMF detection allows the use of advanced Answering machine features, such as remote message retrieval and Call Forwarding mailboxes. Callers may access multiple mailboxes.
14936 DTMF detection is NOT supported:
14937 You will not be able to control the Answering machine from a remote location. Callers will have access to only a single mailbox.
14938 The Hold and Retrieve services are supported:
14939 Hold/Retrieve may still not work if your phone company does not support the service. You may also choose the "Music on hold" option (under "Advanced"), to play music when placing a caller on hold.
14940 The Hold and Retrieve services are NOT supported:
14941 You must use "Music on hold" when placing a caller on hold. The "phone line" will not be available to carry another call while a caller is on hold.
14942 The Call Transfer service is supported:
14943 If your phone company provides both this service and Hold/Retrieve, use of a Call Forwarding mailbox will consume only a single "line" to perform the operation.
14944 Since Hold/Retrieve is not supported, use of a Call Forwarding mailbox will consume two "lines" for the duration of the call.
14945 The Call Transfer service is NOT supported:
14946 Use of a Call Forwarding mailbox will consume two "lines" for the duration of the call.
14947 Analog modem emulation is supported:
14948 You will be able to utilize a paging service that requires use of analog data communications.
14949 Analog modem emulation is NOT supported:
14950 You will not be able to utilize a paging service that requires use of analog data communications.
14951 You must enter only numeric characters for the MSN.
14952 The maximum number of MSNs are already defined. You cannot add another MSN unless you first remove one of the existing entries.
14953 The maximum number of MSNs have now been defined. You cannot add another MSN unless you first remove one of the existing entries.
14954 This MSN is the same as one already in the list. Do you want to replace the name or call type associated with this MSN?
14955 This MSN is already in the list.
14956 You must supply at least one MSN for fax if you want to receive faxes. Do you want to enter a fax MSN now?
14957 You must supply at least one MSN for voice if you want to record calls on the answering machine. Do you want to enter a voice MSN now?
14958 You have changed your locale. It may be necessary to shutdown and restart the Controller if you experience poor sound quality.
14959 CAPI Interrogation Warning
14960 A CAPI driver has been detected but it reports that it is not properly installed. Contact your ISDN card manufacturer for a CAPI update and try reinstalling the driver.
14961 Your version of CAPI has not been verified by Symantec to work reliably with this product. Contact your ISDN card manufacturer for a CAPI driver update and install the driver before proceeding.
14962 Your CAPI driver has not been verified by Symantec as being able to work reliably with this product. If you proceed, some features may not work correctly. Contact the manufacturer to ensure you are using the latest CAPI driver.
14963 Cannot run the CAPI checker to validate that CAPI is properly installed on your system.
14964 Unable to find a CAPI driver on your system. You cannot fax using ISDN without a properly installed ISDN card and CAPI driver. Contact your ISDN card manufacturer for a CAPI update and try reinstalling your CAPI driver.
14965 Unable to load the CAPI driver found on your system. Please ensure that your CAPI driver is properly installed or you will not be able to fax using ISDN.
14966 The CAPI driver found on your system does not have the standard entry points required for validation. Contact your ISDN card manufacturer for a CAPI 2.0 driver update and try reinstalling the driver.
14967 Testing by Symantec has shown that the CAPI driver installed on your system does NOT work (or is not reliable) under %s. You will likely not be able to fax using ISDN.
14968 Testing by Symantec has shown that the CAPI driver installed on your system does NOT work (or is not reliable) with %s. You will likely not be able to fax using ISDN.
14969 The detected CAPI driver reports that it is not fax capable. You will not be able to fax with this driver. Contact your ISDN card manufacturer for a CAPI update with fax support.
14970 You have an older version of the CAPI checker installed on your system. Setup cannot determine if your CAPI will operate properly with @TW_MARQUEE.
14971 Cannot run the CAPI Connection Component to verify that your CAPI supports the voice features required by @TW_MARQUEE.
14972 Cannot interrogate the voice features of your CAPI. Setup cannot determine if your CAPI will operate properly with @TW_MARQUEE.
14973 Your CAPI does not support the protocols required for voice calls. You will not be able to make or receive voice calls using this CAPI. Contact your ISDN card manufacturer for a CAPI update with voice support.
14974 Your CAPI does not support DTMF detection. Many features of @TW_MARQUEE will not operate without this capability. Contact your ISDN card manufacturer for a CAPI update with DTMF support.
14975 Windows NT(tm)
14976 Windows 95(tm)
14977 North American ISDN protocols
14978 Euro ISDN protocols
14979 A law
14980 mu law
14981 WFXIFISC_JOB_DELETED
14982 WFXIFISC_JOB_RESCHEDULED
14983 WFXIFISC_AUTORECEIVE_CHANGED
14984 WFXIFISC_JOB_ABORTED
14985 WFXIFISC_MSNLIST_MUTEX
14986 FaxBlockSize
14987 Global Calls
14988 Voice Support
14989 MSN List
14990 GlobalMsn
14991 Voice CLID
14992 True Hold
14993 Voice Format
14994 ISDNSetEventHWND
14995 ISDNSetListeningExt
14996 ISDNSetAutoreceive
14997 ISDNSetOwnExt
14998 ISDNGetTransmissionRate
14999 ISDNGetCalledExt
15000 R*.ISC
15001 Software\Delrina\Winfax\7.0\Debug
15002 ISDN7Bit
15003 No answer from terminal
15004 Logon not accepted
15005 Message rejected
15006 Checksum error
15007 Syntax error
15008 Operation not allowed
15009 Receiver not valid
15010 Invalid message type
15011 Unknown error
15012 Unknown error
15013 Unknown error
15014 Number unknown
15015 Number locked
15016 Number incomplete
15017 No number
15018 Unknown error
15019 Device error
15020 No message
15021 Operation aborted
15022 Characters replaced
15023 Message too long
15024 Time out
15025 Receiver out of service
15026 No service
15027 SMS no longer stored
15028 Service not supported
15029 SMS cover loaded
15030 Failed to deliver
15031 Remote memory full
15032 No SMS receiver
15033 Unknown SMSC
15034 No error
15035 Line busy
15036 No pickup
15037 Dialing failed
15038 User termination
15039 Enter a list of the MSNs to be answered for fax calls along with a name you would like to use to identify each MSN.
